Build up Infrastructure and test facilities to enable R&D in Machine drives, PQ equipments, Energy conversion systems, Electric Vehicles etc. Extend the facilities to PG and Ph.D students to enable advanced research. Extend the facilities to industries for their R&D work. Hands-on training to industries. Demonstrations / Display of R&D models developed through NaMPET funded projects.

Green Power lab
	• 25 KW Solar Power Plant • 5 KW Wind Power Plant • Simulation Lab • Test set up for conducing EMI / EMC pre-compliance tests • Environmental Test Chamber (Thermal & Humidity)

Technology Transfer Centre
	• 250 kVA Test bay for testing the Proto models with maximum rating of 250 kVA • 100 kW Test bay for testing of DC units of maximum rating 100 kW • 50 kVA Test bay for testing the Proto models with maximum rating of 50 kVA • 250 kVA Auto Transformer with maximum output current of 300A • 50 kVA Auto Transformer with maximum output current of 100A. • Both 250 kVA & 50kVA transformers have following features:   ~ Smooth, continuous and break-less output voltage variation   ~ Remote operation possible • 100 kW DC Power source   ~ DC output voltage varies from 0 to 1000V   ~ Output voltage ripple less than 5%   ~ Designed for continuous operation with rated current   ~ Consists of 3-phase isolation transformer, Rectifier diode modules and filter chokes • Testing of battery operated Power Electronic Modules, in charging and discharging mode • 50 kVA Non-linear Load for testing Single phase and Three phase prototypes • 3 x 20 kW Linear Load for testing of Single phase and Three phase prototype Both linear and nonlinear loads have following features   ~ Tripping of main contactor during fault and activation of alarm   ~ Step load change with labeled illuminated push buttons   ~ Emergency stop and Fan failure shutdown   ~ Hand held wired operating panel for remote operation   ~ Digital Metering • 2 x 4.5 kW AC/DC Programmable Load suitable for the testing of prototypes with Sine, Square and Step Wave output

Low Power lab
	• Sophisticated test instruments • Simulation packages • CAD packages • Development platforms • High speed workstations • Demonstration models	• Hi-tech soldering stations • Precision coil winding machines • Component data center • Visitors lounge • Conference Hall • DSP Workstations

Simulation Packages
	MATLAB (Control Systems Analysis) • SimPower Systems Toolbox • MATLAB Compiler & Realtime   Workshop • SIMULINK Accelerator PSIM (Power Electronics Analysis) • Basic & Motor Drive Module • Digital Control & Sim-Coupler Module	AMESim (Multi-domain System Analysis) ModelSim (Digital Logic Analysis)

Development Systems
	DSP • Code Composer Studio • XDS 510PP Plus • JTAG Emulator • TDS 510 USB JTAG Emulator FPGA • Quartus II • Byteblaster II Download Cable	Microcontroller • MPLAB IDE • MPLAB C18 Compiler • MPLAB PM3 Programmer • ICE 2000 & 4000   In-Circuit Emulator

CAD Packages
	Solid Works (Design & Drafting Package) • 3D representation of a single   design component • 3D arrangement of parts and assemblies • 2D Engineering drawing of parts   and assemblies • Structural Analysis	ORCAD (PCB Design Package) • Schematics • Layout

Workstation
	DELL Precision 670 • RAID with PERC320 Controller card • 64 MB PCIe x 16 NVIDIA

Winding Machines
	Programmable Toroidal Winding Machines • Model : TCW-100B • Make : TRISHUL • Wire Gauge – 35 SWG to 25 SWG	Programmable Coil Winding Machines • Model : Sharp Winder T-108 • Make : TRISHUL (With SMPS Winding Attachment)

High End Oscilloscopes
	500 MHz, 5 GS/s, Non-isolated • Channel : 2 • Type : WR 6051A • Make : LeCroy Analysis Packages: • Power Measurement & Analysis • Jitter & Timing Analysis	350 MHz, 5 GS/s, Non-isolated • Channel : 2 • Type : TDS 5034B • Make : Tektronix Analysis Packages: • Power Measurement & Analysis

	200 MHz, 100 MS/s, Non-isolated • Channel : 4 • Type : TDS 420A • Make : Tektronix 100 MHz, 500 MS/s, Isolated • Channel : 2 • Type : THS 720P • Make : Tektronix	Functions • Harmonics Analysis

Oscilloscopes
	600 MHz, 5-10 GS/s,Non-isolated • Channel : 4 • Type : DSO • Make : LeCroy • Model No : WR 64Xi	Analysis Packages • Power Measurement & Analysis • Jitter & Timing Analysis • CANbus TDM • CANbus TD

	1 GHz • Channel : 4+16 • Type : MSO • Model : MSO4104 • Make : Tektronix	Analysis Packages • Power Measurement & Analysis • CAN & LIN Serial Triggering & Analysis Module • RS232/422/UART Serial Triggering & Analysis   Module • I2 C & SPI Serial Triggering Analysis Module

	100 MHz, 1 GS/s,Isolated • Channel : 4 • Type : DSO • Model No : TPS 2014 • Make : Tektronix	Functions • Harmonics Analysis • Power Waveform Analysis

Arbitrary Function generator
	100 MHz • Channel : 2 • Type : DSO • Model No : AFG 310 • Make : Tektronix

Power Analyzer
	Type : WT3000 Make : Yokogawa Bandwidth : DC, 0.1 to 1 MHz	Functions • Frequency Measurement • Delta Calculation, LabView Driver • Harmonic Measurement • 20ch D/A Output, WT Viewer Software

Thermal Data Monitoring System
	TCM – 24 • Type : TCM-24 • Make : Degree Controls • Sensor : Thermocouple	• Channels : 24 • Range : -150oC to +200oC with accuracy of   +1oC

Automatic LCR Meter
	Type : PM6306/561 Make : Fluke

Electrical Loads
	Non-Linear load • 30 KVA for Non-Linear load testing for UPS	Linear Load • Linear Load 100 KW

DC Electronic Load
	• Model No:330x, 6063B • Make: Agilent	• Rating: 150 - 1800W, 240V, 360A • Modes of Operation: CC, CV, CR, CP Modes

DC Electronic Load
	• Model No:63204 • Make: Chroma • Rating: 5.5 kW, 500V, 100A	• Modes of Operation: CC, CV, CR, CP Modes • Remote Controller: A632001

AC/DC Programmable Source with Analyzer
	• Model: MX-30Pi-LF • Make: CaliforniaInstruments • Rating: 30 kVA AC Output: Single/3-Phase-User Selectable • HV Range: 0-300V (L-N),33.3ARMS /Ph • LV Range: 0-150V (L-N),66.6A RMS / Ph • Frequency: 16 to 500 Hz	DC Output: • HV Range: 0-400V ,16.6A/Channel • LV Range: 0-200V ,33.3A/Channel

	• 400 Sq.m. area for testing and development   of power electronics equipments UPS,   STATCOM, UPQC,   HEV, AC Drives and DC Drives.	• Loading capability of 500 KVA and dynamic    loading facility upto 800 KVA.    Different test bays of 50 KVA, 100 KVA,   250 KVA, 500 KVA rating are available.

Facilities & Equipments
	Test bed and test setups for drives: • 50 HP Induction Machines coupled to   separately excited DC Motor. • 22.5 KW slip recovery machine two nos.   direct-coupled.	• 10 KW test bed of Induction Motor, Induction   Generator, DC Machine and SR Motor. • 10 KW eddy current loading mechanism.   Incremental and Absolute Encoders for   speed& position measurements.

PE Development Systems
	• 10 KVA with 50 KVA short term rated 2-level   inverter for testing control of power qualit   equipments.	• 10 KVA with 50 KVA short term rated 3-level   inverter for high power STATCOM   controller development. • Grid connected regenerative loading   system upto 250 KVA.

Special Facilities
	• 400V 100 AH battery bank for UPS testing   and developments. • 100KVA 3-Ph Variac for varying the input supply.	• 100 KVA Isolation Transformer