Build up Infrastructure and test facilities to enable R&D in Machine drives, PQ equipments, Energy conversion systems, Electric Vehicles etc. Extend the facilities to PG and Ph.D students to enable advanced research. Extend the facilities to industries for their R&D work. Hands-on training to industries. Demonstrations / Display of R&D models developed through NaMPET funded projects.

Low Power lab
	• Sophisticated test instruments • Simulation packages • CAD packages • Development platforms • High speed workstations • Demonstration models	• Hi-tech soldering stations • Precision coil winding machines • Component data center • Visitors lounge • Conference Hall • DSP Workstations

Simulation Packages
	MATLAB (Control Systems Analysis) • SimPower Systems Toolbox • MATLAB Compiler & Realtime   Workshop • SIMULINK Accelerator PSIM (Power Electronics Analysis) • Basic & Motor Drive Module • Digital Control & Sim-Coupler Module	AMESim (Multi-domain System Analysis) ModelSim (Digital Logic Analysis)

Development Systems
	DSP • Code Composer Studio • XDS 510PP Plus • JTAG Emulator • TDS 510 USB JTAG Emulator FPGA • Quartus II • Byteblaster II Download Cable	Microcontroller • MPLAB IDE • MPLAB C18 Compiler • MPLAB PM3 Programmer • ICE 2000 & 4000    In-Circuit Emulator

CAD Packages
	Solid Works (Design & Drafting Package) • 3D representation of a single   design component • 3D arrangement of parts and assemblies • 2D Engineering drawing of parts   and assemblies • Structural Analysis	ORCAD (PCB Design Package) • Schematics • Layout

Workstation
	DELL Precision 670 • RAID with PERC320 Controller card • 64 MB PCIe x 16 NVIDIA

Winding Machines
	Programmable Toroidal Winding Machines • Model : TCW-100B • Make : TRISHUL • Wire Gauge – 35 SWG to 25 SWG	Programmable Coil Winding Machines • Model : Sharp Winder T-108 • Make : TRISHUL (With SMPS Winding Attachment)

High End Oscilloscopes
	500 MHz, 5 GS/s, Non-isolated • Channel : 2 • Type : WR 6051A • Make : LeCroy Analysis Packages: • Power Measurement & Analysis • Jitter & Timing Analysis	350 MHz, 5 GS/s, Non-isolated • Channel : 2 • Type : TDS 5034B • Make : Tektronix Analysis Packages: • Power Measurement & Analysis

High End Oscilloscopes
	200 MHz, 100 MS/s, Non-isolated • Channel : 4 • Type : TDS 420A • Make : Tektronix 100 MHz, 500 MS/s, Isolated • Channel : 2 • Type : THS 720P • Make : Tektronix	Functions • Harmonics Analysis

Power Analyzer
	Type : WT3000 Make : Yokogawa Bandwidth : DC, 0.1 to 1 MHz	Functions • Frequency Measurement • Delta Calculation, LabView Driver • Harmonic Measurement • 20ch D/A Output, WT Viewer Software

Thermal Data Monitoring System
	TCM – 24 • Type : TCM-24 • Make : Degree Controls • Sensor : Thermocouple	• Channels : 24 • Range : -150oC to +200oC with accuracy of   +1oC

Automatic LCR Meter
	Type : PM6306/561 Make : Fluke

Electrical Loads
	Non-Linear load • 30 KVA for Non-Linear load testing for UPS	Linear Load • Linear Load 100 KW

DC Electronic Load
	• Model No:330x, 6063B • Make: Agilent	• Rating: 150 - 1800W, 240V, 360A • Modes of Operation: CC, CV, CR, CP Modes

DC Electronic Load
	• Model No:63204 • Make: Chroma • Rating: 5.5 kW, 500V, 100A	• Modes of Operation: CC, CV, CR, CP Modes • Remote Controller: A632001

AC/DC Programmable Source with Analyzer
	• Model: MX-30Pi-LF • Make: CaliforniaInstruments • Rating: 30 kVA AC Output: Single/3-Phase-User Selectable • HV Range: 0-300V (L-N),33.3ARMS /Ph • LV Range: 0-150V (L-N),66.6A RMS / Ph • Frequency: 16 to 500 Hz	DC Output: • HV Range: 0-400V ,16.6A/Channel • LV Range: 0-200V ,33.3A/Channel

	• 400 Sq.m. area for testing and development   of power electronics equipments UPS,   STATCOM, UPQC,    HEV, AC Drives and DC Drives.	• Loading capability of 500 KVA and dynamic    loading facility upto 800 KVA.   Different test bays of 50 KVA, 100 KVA,   250 KVA, 500 KVA rating are available.

Facilities & Equipments
	Test bed and test setups for drives: • 50 HP Induction Machines coupled to   separately excited DC Motor. • 22.5 KW slip recovery machine two nos.   direct-coupled.	• 10 KW test bed of Induction Motor, Induction   Generator, DC Machine and SR Motor. • 10 KW eddy current loading mechanism.   Incremental and Absolute Encoders for   speed& position measurements.

PE Development Systems
	• 10 KVA with 50 KVA short term rated 2-level   inverter for testing control of power qualit   equipments.	• 10 KVA with 50 KVA short term rated 3-level   inverter for high power STATCOM   controller development. • Grid connected regenerative loading   system upto 250 KVA.

Special Facilities
	• 400V 100 AH battery bank for UPS testing   and developments. • 100KVA 3-Ph Variac for varying the input   supply.	• 100 KVA Isolation Transformer

Facilities built for design, testing, fabrication and prototyping of machines to undertake projects in Machines and Drives. The activity strengthened the Infrastructure and expertise in the area of Power Electronics Drives and Permanent Magnet Machines.

Facilities:

• State of art laboratory in power electronics and electronics machines
• Test facilities in the area of permanent magnet machines
• Software laboratory to carry out design & performance prediction of permanent magnet machines
• Facilities for design, testing, fabrication and prototyping of machines.
• Undertake projects in machines and drives
• View Detail

Undertake R&D and manpower training in the area of Power Systems Applications in Power Electronics. Provide hardware platform for the researchers to test new ideas. Impart hands-on training to students and practicing engineers.

Facilities:

• Research, development and manpower training in the area of Power Electronics applications to Power systems.
• Utilized by regular and sponsored students of M.Tech and PhD degrees, for readily testing their new ideas.
• Facility for hands-on training to students and practicing engineers.
• View Detail

Infrastructure facilities built for Research & development, simulation and prototyping in the area of power converters for drives and STATCOM applications. Capable of taking up industry projects. Infrastructure for the simulation and testing of High Power Drives and PQ solutions. Cater to the needs of industries based at Kharagpur, Jamshedpur, Rourkela, Kolkata, Ranchi etc.

Facilities:

• Power converters for drives and STATCOM application
• Coupled wound rotor machines for drives applications
• Harmonic and reactive power compensators
• Rugged AC and DC bus along with test beds for testing various power electronic equipments
• Power electronic simulation software packages, computing platforms, DSP based hardware platform, sophisticated testing instruments, etc
• View Detail

Build up a test platform to enable research work of all types of electrical drives

Facilities:

A test platform is developed in the Department of Electrical & Electronics Engineering under NaMPET project for all types of electrical drives. The test setup provides a readymade platform for the researchers to test and validate their research findings on the drive performance characterization, analysis and control. This facility is utilized by the students at all levels (PhD, PG and UG) and Staff members working at research level to get insight into the theory of operation and control of electrical drives. This facility also can cater to the needs of electrical industries in India

• View Detail

To provide infrastructure for enabling product oriented Machine drives research in the short term and power quality related issues in the long term.

Facilities:

The Department of Electrical Engineering, BESU, Shibpur has a strong heritage in the area of power electronics in general and in machine drives in particular. This consists of expertise in machine and electromagnetic design & fabrication guided by in-depth understanding of the entire Power Electronics and control dynamics associated with it.

• View Detail

Infrastructure is built for self-learning environment for the PG students at entry level. It can support 5 students at a time. Five Workbench each Comprising of Power Supply, Function Generator, Oscilloscope, Multimeters, Soldering Station and Constructional Project Kits. Also Self-learning kits with all design and constructional details for the students.
Facilities:

• View Detail

Electrical Machine Design Centre (EMDC) A National expertise base in Electrical Machine design to cater to the needs of Power Electronics, Drives and Energy systems.
Facilities:

• “FLUX 2D/3D” Finite element software
• “SPEED” analytical software
• “MagNet” a powerful FEM tool
• “MotorSolve” accurate design and analysis software for motors
• View Detail

Under NaMPET funding well equipped power electronics lab is built at Electrical Engineering dept. for the benefit of UG and PG and research students for project and industry related research & developments work in Power electronics
Facilities:

• DC drive demonstration modules
• FPGA Based AC & DC Drives with Load
• Three phase and single phase VSI fed PWM inverter
• Teaching Aid Kits
• JTAG Emulator and Debugger for DSP
• D-SPACE 1104
• Sophisticated testing instruments
• View Detail

Power Electronics lab Infrastructure developed under NaMPET facilitate research in cutting edge technologies in the Department of Electrical and Electronics Engineering, in the area of Power Electronics/Machine drives/ Controllers for Renewable energy applications and FACTS.
Facilities:

• DC drive demonstration modules
• Special machines: Brushless DC drive, Stepper motor & Switched reluctance machine
• Three phase and single phase VSI fed PWM inverter
• DSP & FPGA based hardware platforms for power electronics application
• Sophisticated testing instruments
• View Detail

A laboratory in the advance field of Power electronics and variable frequency drives has been built under NaMPET at NIT Rourkala which facilitate the following.

• To introduce the students to state of the art simulation tools which are employed extensively by industry
• To provide students with an opportunity to gain design experience through projects
• To equip
• To organize PE training programme for local industries

Facilities:

• Test Bench I: 3 phase (Diode Rectifier + Inverter + Brake Chopper) Stack
• Test Bench II: Switched Reluctance Motor Drive System
• Test Bench III: Multilevel three phase Induction Motor Drives System
• Test Bench IV: IPM PMSM Machine drives system
• Test Bench V: Construction Project (Teaching Aids/Trainer kits)
• Test Bench VI: Zero Voltage switching resonant DC-DC converter
• Test Bench VII: Zero Current switching resonant DC-DC converter
• Power Electronics and Drives Simulation Lab
• View Detail

Advanced Power Electronics & Drives Lab under NaMPET has been built in the Dept. of Electrical Engineering. The aim of the project is to provide platforms for the motivated faculty and PG students of the Department of Electrical Engineering RIT, Kottayam, where they can come up with creative ideas, develop, implement/test their results.
Facilities:
The lab mainly consists of five test benches and a software desk.

• Test Bench I: Linear Induction Motor Drive Controller Unit
• Test Bench II: DSP Based Slip Ring Induction Motor / DC Motor Drive Unit
• Test Bench III: DSP Based BLDC Motor Drive Unit
• Test Bench IV: FPGA Based SRM Drive Unit
• Test Bench V: FPGA Based Squirrel Cage Induction Motor Drive Unit
• Software Desk
• Sophisticated Testing Instruments
• View Detail