NODAL CENTRE, C-DAC (T)
Objective

Build up Infrastructure and test facilities to enable R&D in Machine drives, PQ equipments, Energy conversion systems, Electric Vehicles etc. Extend the facilities to PG and Ph.D students to enable advanced research. Extend the facilities to industries for their R&D work. Hands-on training to industries. Demonstrations / Display of R&D models developed through NaMPET funded projects.

Available Resources
Low Power lab
Low Power Lab • Sophisticated test instruments
• Simulation packages
• CAD packages
• Development platforms
• High speed workstations
• Demonstration models
• Hi-tech soldering stations
• Precision coil winding machines
• Component data center
• Visitors lounge
• Conference Hall
• DSP Workstations
   
Simulation Packages
Simulation Packages MATLAB (Control Systems Analysis)
• SimPower Systems Toolbox
• MATLAB Compiler & Realtime
  Workshop
• SIMULINK Accelerator

PSIM (Power Electronics Analysis)
• Basic & Motor Drive Module
• Digital Control & Sim-Coupler Module
AMESim (Multi-domain System Analysis)
ModelSim (Digital Logic Analysis)
   
Development Systems
Development Systems DSP
• Code Composer Studio
• XDS 510PP Plus
• JTAG Emulator
• TDS 510 USB JTAG Emulator

FPGA
• Quartus II
• Byteblaster II Download Cable
Microcontroller
• MPLAB IDE
• MPLAB C18 Compiler
• MPLAB PM3 Programmer
• ICE 2000 & 4000
  In-Circuit Emulator
   
CAD Packages
CAD Packages Solid Works (Design & Drafting Package)
• 3D representation of a single
  design component
• 3D arrangement of parts and assemblies
• 2D Engineering drawing of parts
  and assemblies
• Structural Analysis
ORCAD (PCB Design Package)
• Schematics
• Layout
   
Workstation
Workstation DELL Precision 670
• RAID with PERC320 Controller card
• 64 MB PCIe x 16 NVIDIA
 
   
Winding Machines
Winding Machines Programmable Toroidal Winding Machines
• Model : TCW-100B
• Make : TRISHUL
• Wire Gauge – 35 SWG to 25 SWG
Programmable Coil Winding Machines
• Model : Sharp Winder T-108
• Make : TRISHUL
(With SMPS Winding Attachment)
   
Major Test Instruments
High End Oscilloscopes
High End Oscilloscope 500 MHz, 5 GS/s, Non-isolated
• Channel : 2
• Type : WR 6051A
• Make : LeCroy

Analysis Packages:
• Power Measurement & Analysis
• Jitter & Timing Analysis
350 MHz, 5 GS/s, Non-isolated
• Channel : 2
• Type : TDS 5034B
• Make : Tektronix

Analysis Packages:
• Power Measurement & Analysis
   
 
High End Oscilloscope 200 MHz, 100 MS/s, Non-isolated
• Channel : 4
• Type : TDS 420A
• Make : Tektronix

100 MHz, 500 MS/s, Isolated
• Channel : 2
• Type : THS 720P
• Make : Tektronix
Functions
• Harmonics Analysis
   
Oscilloscopes
Oscilloscope 600 MHz, 5-10 GS/s,Non-isolated
• Channel : 4
• Type : DSO
• Make : LeCroy
• Model No : WR 64Xi
Analysis Packages
• Power Measurement & Analysis
• Jitter & Timing Analysis
• CANbus TDM
• CANbus TD
   
 
Oscilloscope 1 GHz
• Channel : 4+16
• Type : MSO
• Model : MSO4104
• Make : Tektronix
Analysis Packages
• Power Measurement & Analysis
• CAN & LIN Serial Triggering & Analysis Module
• RS232/422/UART Serial Triggering & Analysis
  Module
• I2 C & SPI Serial Triggering Analysis Module
   
 
Oscilloscope 100 MHz, 1 GS/s,Isolated
• Channel : 4
• Type : DSO
• Model No : TPS 2014
• Make : Tektronix
Functions
• Harmonics Analysis
• Power Waveform Analysis
   
Arbitrary Function generator
Arbitrary Function generator 100 MHz
• Channel : 2
• Type : DSO
• Model No : AFG 310
• Make : Tektronix
   
Power Analyzer
Power Analyser Type : WT3000
Make : Yokogawa
Bandwidth : DC, 0.1 to 1 MHz
Functions
• Frequency Measurement
• Delta Calculation, LabView Driver
• Harmonic Measurement
• 20ch D/A Output, WT Viewer Software
   
Thermal Data Monitoring System
Thermal Data Monitoring System TCM – 24
• Type : TCM-24
• Make : Degree Controls
• Sensor : Thermocouple
• Channels : 24
• Range : -150oC to +200oC with accuracy of
  +1oC
   
Automatic LCR Meter
Automatic LCR Meter Type : PM6306/561
Make : Fluke
 
   
Electrical Loads
Electrical Loads Non-Linear load
• 30 KVA for Non-Linear load testing for UPS
Linear Load
• Linear Load 100 KW
   
DC Electronic Load
Electrical Loads • Model No:330x, 6063B
• Make: Agilent
• Rating: 150 - 1800W, 240V, 360A
• Modes of Operation: CC, CV, CR, CP Modes
   
DC Electronic Load
DC Electronic Load • Model No:63204
• Make: Chroma
• Rating: 5.5 kW, 500V, 100A
• Modes of Operation: CC, CV, CR, CP Modes
• Remote Controller: A632001
   
AC/DC Programmable Source with Analyzer
AC/DC Programmable Source with Analyzer
• Model: MX-30Pi-LF
• Make: CaliforniaInstruments
• Rating: 30 kVA
AC Output: Single/3-Phase-User Selectable
• HV Range: 0-300V (L-N),33.3ARMS /Ph
• LV Range: 0-150V (L-N),66.6A RMS / Ph
• Frequency: 16 to 500 Hz
DC Output:
• HV Range: 0-400V ,16.6A/Channel
• LV Range: 0-200V ,33.3A/Channel
 
High Power Lab
 
High Power Lab • 400 Sq.m. area for testing and development
  of power electronics equipments UPS,
  STATCOM, UPQC,
  HEV, AC Drives and DC Drives.
• Loading capability of 500 KVA and dynamic
   loading facility upto 800 KVA.
   Different test bays of 50 KVA, 100 KVA,
  250 KVA, 500 KVA rating are available.
   
Facilities & Equipments
Facilities & Equipments Test bed and test setups for drives:
• 50 HP Induction Machines coupled to
  separately excited DC Motor.
• 22.5 KW slip recovery machine two nos.
  direct-coupled.
• 10 KW test bed of Induction Motor, Induction
  Generator, DC Machine and SR Motor.
• 10 KW eddy current loading mechanism.
  Incremental and Absolute Encoders for
  speed& position measurements.
   
PE Development Systems
PE Development Systems • 10 KVA with 50 KVA short term rated 2-level
  inverter for testing control of power qualit
  equipments.
• 10 KVA with 50 KVA short term rated 3-level
  inverter for high power STATCOM
  controller development.

• Grid connected regenerative loading
  system upto 250 KVA.
   
Special Facilities
Special Facilities • 400V 100 AH battery bank for UPS testing
  and developments.

• 100KVA 3-Ph Variac for varying the input supply.
• 100 KVA Isolation Transformer